Skip to main content

Dev Station Technology

Home / About us / Lee Nguyen

Lee Nguyen

Co-Founder of Dev Station Technology

lee@dev-station.tech

linkedin.com/in/leenguyen-devstation

  • Digital inspection software
  • BLE instrumentation
  • Offline-first mobile apps
  • IIoT
  • LOLER and HSE compliance
  • .NET MAUI
  • Azure
  • Offshore development centres
Lee Nguyen, Co-Founder of Dev Station Technology
Lee Nguyen Co-Founder of Dev Station Technology Builds inspection software that takes the reading straight off the instrument and carries it to a signed certificate.

About Lee Nguyen

Lee Nguyen co-founded Dev Station Technology in July 2023. He leads solution design and delivery for BLE-connected test equipment, which means torque gauges, pull testers, load cells and digital gauges feeding straight into offline-first mobile apps. His clients are inspection, lifting, testing and field service companies in the UK and the US.

The direction came from one job on site. A UK engineer finished an anchor pull test in four minutes, then spent three hours retyping readings, matching photos to anchors from memory and formatting a PDF. In his words, the test was never the bottleneck.

On the platforms he has delivered since, report turnaround has gone from around three hours to about twenty minutes. He also runs dedicated offshore development centres for clients who need engineers embedded long term, from team ramp-up through delivery governance.

What he works on

  • Readings pulled from the instrument. Mobile apps that read BLE torque gauges, pull testers and digital gauges over GATT or a vendor SDK, with no manual entry step left to get wrong.
  • Offline-first field capture. Photos, GPS, timestamps and signatures on one record, working through a full shift with no signal and syncing when the engineer reaches coverage.
  • Certificates produced on site. The report comes off the job while the engineer is still there, in the format the client or the regulator expects.
  • The job and approval engine. Scheduling, workflow and sign-off sitting between the device and the deliverable.
  • Audit trails for LOLER and HSE. Who inspected what, on which device, when, and what changed afterwards.

Stack: .NET MAUI, Xamarin, BLE and GATT, Azure, REST APIs, plus embedded and firmware integration.

Work you can read about

Hydrajaws Limited makes portable pull testers in the UK and wanted an app that could read its own instruments. Verify Auto covers automotive safety compliance testing. The self-hosted IoT platform was built on an open source base so the client owns every device, dashboard and data record.

Closest service pages to his work: digital quality inspection, gauge and instrument capture, and dedicated offshore development centres.

Get in touch

If your team still moves test data by hand, or your gauge vendor stops at showing a number on screen, send him the workflow. Write to lee@dev-station.tech or talk to Dev Station.

Articles by Lee Nguyen

Embedded car

Embedded Car Software: Trends, Architecture and Standards

Embedded car software is the code that runs on dedicated microcontrollers and system-on-chip platforms inside a vehicle, from engine timing to advanced driver-assistance systems. The industry is moving from distributed, single-function ECUs toward domain, zonal and centralized architectures that support OTA updates, governed by ISO 26262, AUTOSAR and ISO/SAE 21434.

Read More »
Automotive Embedded Systems

Automotive Embedded Systems: Components, Architecture and Standards

An automotive embedded system is a purpose-built computer inside a vehicle that performs dedicated functions with deterministic, real-time responsiveness. Modern vehicles combine many ECUs with sensors, actuators, buses and a layered software stack, governed by ISO 26262, AUTOSAR, UNECE R155 and R156, and ISO 21434.

Read More »
How to outsource ai for business automation

How to Set Up an Offshore Development Center

An offshore development center is a dedicated software facility in another country that works as a remote extension of your engineering team. Setup typically takes four to eight weeks from signed agreement to first productive sprint, and the model suits companies scaling a long-lived product.

Read More »
Let's Talk