Skip to main content

Dev Station Technology

Digital quality inspection

Inspection software built around your process

We build custom inspection platforms for manufacturers and equipment makers in the UK and US: readings pulled straight off your testers, capture that keeps working with no signal, and certificates your auditor accepts.

Anchor test, bay 4, captured offline

Anchor pull testM12 resin fixing, 6.4 kN: pass
Torque checkFrom the KTC tester, 112 Nm: pass
Substrate conditionPhoto attached: pass
Fixing depth48 mm, below spec: fail
SyncedTwo hours later, nothing lost

A record as your inspector fills it in, offline on site. The failed check has already raised a corrective action.

500%Rise in potential clients after the Hydrajaws rebuild
2 appsFree and premium tiers from one codebase
10 to 14 weeksA pilot on one site
OfflineCapture that survives hours with no signal
Buy or build

Most teams asking about inspection software should buy a licence

Here is how we tell the two cases apart, before anyone writes a proposal
Buy a licence when

A standard form will do

  • Your checks fit a standard form and report
  • Inspectors have signal most of the day
  • Nothing is read off an instrument
Build when

The tool has to bend to you

  • Readings come off testers over Bluetooth or an SDK
  • A regulator or client dictates the certificate
  • Results must land in your ERP, MES or CMMS

Per-seat licences across 100 or more field users can cost more than owning the software.

Fit check

Is a custom build right for you?

Pick us when

  • Inspectors are out of signal for hours and cannot lose a record
  • Readings come off torque wrenches, pull testers or gauges
  • Your certificate follows a format someone else dictates
  • Results have to reach your ERP, MES or CMMS without retyping

Look elsewhere when

  • Your checks fit a standard form and a standard report
  • Inspectors work with decent signal most of the day
  • Your data can live in a vendor cloud under their terms
  • You need it running next week
What we build

Six things a generic inspection app leaves out

From the inspector to the system of record
Capture
Offline capture and syncPhotos, readings, signatures
Instrument readingsBluetooth or a vendor SDK
Record
Certificates in your formatMade when the check passes
Roles and audit trailWho, when, on which device
Act
ERP, MES and CMMSA failed check raises a work order
DashboardsFailure rates by site, shift and part

A quality management system is the paperwork layer. Inspection software is the capture layer, and the two should be connected.

How the work runs

One site running before you commit to a rollout

From the floor walk to the rollout
Weeks 1 to 2

Map the checks

We walk the floor with your inspectors and write down what happens, workarounds included.

Weeks 3 to 4

Design workflow and data

Forms, pass and fail logic, certificate layout, integrations and offline rules.

Weeks 5 to 12

Build and pilot

One site runs it on real jobs while we build. Demo every two weeks.

Ongoing

Roll out

Site by site, then region by region, with code and documentation handed over.

If an off-the-shelf tool covers most of your checks, we build only the part it cannot handle and connect the two.

Technologies

What we build on, and what we connect to

Every item comes from something already shipped.

Builds

Three builds in the same space

Hydrajaws safety testing app built by Dev Station
Case study, United Kingdom

An app that could read the client own testers

The old app was poorly documented and could not read the instruments. We rebuilt it as free and premium apps, put users behind Azure AD B2C and integrated the KTC SDK, which also opened the automotive market.

500%Rise in potential clients after the rebuild
Verify Auto automotive safety app built by Dev Station
Case study, automotive

Safety compliance for a brand judged on its finish

Checks against a published standard, a certificate at the end, and an interface validated through prototypes before production code.

PrototypesDesign validated before build
Digital testing platform for anchor and torque checks built by Dev Station
Case study, United Kingdom

Anchor and torque checks in the field

Scheduled examinations, capture where signal is unreliable, pass and fail logic tied to load values, and a certificate the duty holder can file.

OfflineCapture where signal is unreliable

Tell us what you inspect

Three fields. A senior engineer reads it, and you get an answer within one working day.

  • We map your current checks on a 30-minute call
  • You get a written view on buy or build, with a budget range
  • No obligation, and no phone number needed to start
FAQs

Questions we get on the first call

Does the app work with no signal?

Yes. Inspectors capture checks, photos, readings and signatures on the device, and records sync when coverage returns. We design the conflict rules with you.

Can it read values from our testing equipment?

If the instrument exposes a Bluetooth profile or a vendor SDK, yes. Send the model numbers and we tell you what is possible before you spend anything.

Can we keep our existing quality management system?

Usually yes, and it is often the cheaper answer. We build the capture layer and push results into your QMS, so a failed check raises a non-conformance without retyping.

What happens to our historical paper records?

If they exist in any structured form they can be imported, as a workstream with reconciliation on both sides. If they exist only as scans, we say so.

Bring us your messiest inspection

The one with the spreadsheet, the photos on someone phone and the certificate nobody can find. Thirty minutes and you will know whether it is worth building.

Let's Talk